Severne Overdrive_M2

  • Udsalg
  • Normalpris 5.900,00 kr
Inklusive moms. Levering bliver beregnet ved kassen.


The OverDrive focuses on maximum reaching speed with increased twist and less back-hand pressure. A lighter weight means improved handling characteristics.

A moderate width sleeve, 7 battens and 3 cams provide draft stability through a huge wind range. Combined with a higher aspect ratio, the OverDrive M2 has impeccable handling characteristics; a lightweight feel, with softer flex.

Smaller sizes (5.5 and down) have 6 battens to increase flex and control for when conditions get extreme. The new OverDrive M2 benefits directly from advances made on the Mach2 development. Increased depth below the boom adds drive and stability whilst the mid and upper leech have been opened more to decrease drag. Flow aligned battens further improve aerodynamics. The resulting performance is explosive acceleration and big numbers on the GPS.

The OverDrive M2 can be run on either RDM masts or SDM masts. The 4.6 is fully set up for RDM with three RDM cams. The sizes 5.0 to 7.8 are setup for SDM. They run one RDM cam (top) and two SDM cams below. The RDM top cam fits and rotates prefect on our Apex shaped masts.

To set up the 5.0 to 7.8 on RDM, simply change the two SDM cams to RDM cams and the sail is fully setup to rig on RDM masts.

KEY DIFFERENCES BETWEEN MACH2 AND OVERDRIVE M2;

SLEEVE WIDTH:
33% narrower than Mach 2 for lower weight and less water retention.

WEIGHT:
Lighter, softer feel

BOOM LENGTH:
10cm shorter on most sizes for less back-hand pressure.

RDM COMPATIBLE:
Compatible with both RDM and SDM masts

 

UPGRADES FOR 2019

/ FLOW ALIGNED BATTENS

/ REDUCED WEIGHT

/ IMPROVED SPEED AND ACCELERATION

KEY FEATURES
/ MONOFILM BODY – MAXIMUM STABILITY AND PERFORMANCE
/ KEVLAR X-PLY LUFF SLEEVE – MINIMAL VERTICAL STRETCH WITH HORIZONTAL ELASTICITY
/ TUBE BATTENS – HIGH PERFORMANCE STABILITY
OVERDRIVE M2 LUFF BOOM BATTENS WEIGHT CAMS HEAD RECOMMENDED MAST RDM/SDM CAM SETUP
4.6 382 164 6 3.8 3 FIXED SEVERNE 370 3x RDM cams
5.0 402 167 6 3.9 3 FIXED SEVERNE 400 1xRDM(top cam), 2xSDM included. Option to change bottom 2 cams to RDM.
5.5 416 178 6 4.1 3 FIXED SEVERNE 400 1xRDM(top cam), 2xSDM included. Option to change bottom 2 cams to RDM.
6.2 432 186 7 4.5 3 FIXED SEVERNE 430 1xRDM(top cam), 2xSDM included. Option to change bottom 2 cams to RDM.
7.0 462 191 7 4.8 3 FIXED SEVERNE 430 1xRDM(top cam), 2xSDM included. Option to change bottom 2 cams to RDM.
7.8 490 202 7 5.1 3 FIXED SEVERNE 460 1xRDM(top cam), 2xSDM included. Option to change bottom 2 cams to RDM.
8.6 512 210 7 5.3 3 FIXED SEVERNE 490 3x SDM
9.4 520 220 7 5.6 3 FIXED SEVERNE 490 3x SDM
* for more information on cam setup, see the overview page of the Overdrive